Enclosure plastic 222x146x55mm. - Operating temperature: minus 20oC to 100oC
- Bosses on internal base allow fixing of PCBs horizontally, or connection of terminals etc.
- The lid and base incorporate a tongue and groove sealing systemwith a EPDM gasket
- Lid fixing screws are M-4 stainless steel (non-magnetic) into threaded brass inserts
- Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture and dust.
|
IP Rating : IP65 |
|
Dust/Particle Ingress Protection : 6 - Dust tight, no ingress of dust |
|
Liquid/Moisture Ingress Protection : 5 - Water jets |
|
Width : 222.0mm |
|
Height : 55.0mm |
|
Depth : 146.0mm |
|
Material : ABS Plastic (Acrylonitrile Butadiene Styrene) |
|
PCB Internal Guide Slots : true |
|
Internal Mounting Posts : true |
|
Gasket sealing system : true |
|
Lid Screws : 6.0pc |
